fit-PC2/2i power supply disconnect/connect specifications
Posted: Sun Dec 01, 2013 10:09 am
In order to be compliant with specs and avoid unexpected system behavior, power supply disconnect/connect operation should be applied as follows:
1. Power disconnect/connect to be applied on the AC side.
DC side is the output from the transformer and rectifier circuits, and cannot guarantee stable behavior when disturbed.
2. Time interval between power disconnect and next connect should be longer than 3s.
3. Main power input slew rate range:
Min: 0.0015 V/us (=12 V/8ms)
Max: 0.003 V/us (=12 V/4ms)
1. Power disconnect/connect to be applied on the AC side.
DC side is the output from the transformer and rectifier circuits, and cannot guarantee stable behavior when disturbed.
2. Time interval between power disconnect and next connect should be longer than 3s.
3. Main power input slew rate range:
Min: 0.0015 V/us (=12 V/8ms)
Max: 0.003 V/us (=12 V/4ms)