My setup:
- - fitlet iA10
- 120G SSD: KINGSTON SMS200S3120G
- APU TDP set to default in BIOS (4500)
- ondemand cpufreq governor
- Aggressive Link Power Management (ALPM) set to min_power
It was indeed measured at the wall. The CPU is completely idle.irads wrote:I guess that 6.8W is measured at the wall. This translates to about 5.5W DC.
It would be interesting to see what is the CPU utilization. Normally at idle the CPU consumes about 1.5W.
I've been able to reduce idle power consumption a bit further.irads wrote:I think 4W shared between RAM/mSATA/WiFi/Ethernet/Audio is possible but could be probably slightly lowered (for example, you would not normally use both WiFi and Ethernet so one of them can be disabled).