CentOS 5.4 - IR controller driver
Posted: Sat Mar 27, 2010 9:56 pm
Install guide for IR controller module (lirc) on CentOS 5.4:
This guide assumes that CentOS 5.4 is already installed on your Fit-PC2
1) Download attached lirc_centos.rar and extract lirc_dev.ko and lirc_igorplugusb.ko
2) cp lirc_dev.ko lirc_igorplugusb.ko /lib/modules/2.6.18-164.el5/extra/
3) depmod
4) modprobe lirc_igorplugusb
5) Reboot the computer
After reboot, you can check whether the module is loaded:
lsmod | grep lirc
dmesg | grep lirc
cat /var/log/messages | grep lirc | less
Please post here any problems you have with this driver
EDIT: Added link to alternate download location
Compiled modules: http://www.fit-pc2.com/download/centos/ ... centos.zip
Installation instructions: http://www.fit-pc2.com/download/centos/IR/readme_IR.txt
This guide assumes that CentOS 5.4 is already installed on your Fit-PC2
1) Download attached lirc_centos.rar and extract lirc_dev.ko and lirc_igorplugusb.ko
2) cp lirc_dev.ko lirc_igorplugusb.ko /lib/modules/2.6.18-164.el5/extra/
3) depmod
4) modprobe lirc_igorplugusb
5) Reboot the computer
After reboot, you can check whether the module is loaded:
lsmod | grep lirc
Code: Select all
lirc_igorplugusb 11524 0
lirc_dev 16920 1 lirc_igorplugusb
Code: Select all
lirc_dev: IR Remote Control driver registered, major 61
lirc_igorplugusb: USB remote driver for LIRC v0.2
Please post here any problems you have with this driver
EDIT: Added link to alternate download location
Compiled modules: http://www.fit-pc2.com/download/centos/ ... centos.zip
Installation instructions: http://www.fit-pc2.com/download/centos/IR/readme_IR.txt