Fitlet2: Revision Notes
From fit-PC wiki
Contents
fitlet2 Rev 1.5
- The PMIC and DPUs voltage regulators were replaced due to a component shortage.
- Added FPGA for power sequence.
fitlet2 Rev 1.41
- Fixing the auto ON issue
fitlet2 Rev 1.4
- The 3.3V and 1.05 voltage regulators were replaced due to a component shortage.
fitlet2 Rev 1.31
- The 5V voltage regulator was replaced due to a component shortage.
fitlet2 Rev 1.3
- Added reverse polarity protection.
- Added over-voltage protection.
- Added a POE power redundancy, it always works but we had to add protection.
- Added control on the USB ports power supply, the customer can decide if he wants the USB ports will have power on S5 or S3.
- Added control on the power LED, the customer can decide when the orange LED will Lit (S5 or only at S3).
fitlet2 Rev 1.2
- External power button - Add LED power pin feature.
- Power button behavior configuration fix implemented.
- Added on-board Extended Voltage range feature 36V.
- Added analog audio always detect feature
How to identify rev 1.2
SN: 1180601-00001 or higher